Provide High Quality 304 Stainless Steel Plate, AISI 304 Stainless Steel Seamless Pipe, 304 Stainless Steel Coil, 304 Stainless Steel Strip, 304 Stainless Steel Welded Pipe, 304 Stainless Steel Round Bar
304 Stainless Steel is used in a wide variety of home and commercial applications, including:
▪ Kitchen benches, sinks, troughs, equipment, and appliances
▪ Chemical containers, including for transport
▪ Food processing equipment, particularly in beer brewing, milk processing, and wine making
▪ Heat exchangers
▪ Architectural trim and molding
▪ Woven or welded screens for mining, quarrying & water filtration
▪ Automotive and aerospace structural use
▪ Nuts, bolts, screws, and other fasteners in the marine environment
▪ Construction material in large buildings
▪ Dyeing industry
▪ ASTM/ASME: UNS S30400 / S30403
▪ EURONORM: 1.4301 / 1.4303
▪ AFNOR: Z5 CN 18.09 / Z2 CN 18.10
▪ DIN: X5 CrNi 18 10 / X2 CrNi 19 11
Weight % (all values are maximum unless a range is otherwise indicated)
| Element | 304 | 304H |
| Cr | 18.0 - 20.0 | 18.0 - 20.0 |
| Ni | 8.0 - 10 | 8.0 - 10 |
| C | 0.08 | 0.04 - 0.1 |
| Mn | 2.0 | 2.0 |
| P | 0.045 | 0.045 |
| S | 0.03 | 0.03 |
| Si | 0.75 | 0.75 |
| N | 0.1 | 0.1 |
| Fe | Balance | Balance |
| Typical | 304 | 304H | |
| 0.2% Offset Yield Strength, ksi | 43 | 30 min | 30 min |
| Ultimate Tensile Strength, ksi | 91 | 75 min | 75 min |
| Elongation in 2 inches, % | 58 | 40 min | 40 min |
| Reduction in Area, % | 68 | -- | - |
| Hardness, Rockwell B | 83 | 92 max | 92 max |
304/304H can be easily welded and processed by standard shop fabrication practices.
The alloy is quite ductile and forms easily. Cold working operations will increase the strength and hardness of the alloy and might leave it slightly magnetic.
Working temperatures of 1652–2102°F (750–1150°C) are recommended for most hot working processes. For maximum corrosion resistance, the material should be annealed at 1900°F (1038°C) minimum and water quenched or rapidly cooled by other means after hot working.
| 304 stainless steel plate sizes and specifications | |
| Grade | 304 |
| Cold rolled stainless steel plate | Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm, Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel sheet | Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
| Stainless steel plate | Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling |
| 304 stainless steel strip sizes and specifications | |
| Grade | 304 |
| Cold rolled stainless steel strip | Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel strip | Thickness: 3.0mm - 16mm, Width: 10mm - 900mm Surface: No.1/pickling |
| Stainless steel foil | Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
| 304 stainless steel coil sizes and specifications | |
| Grade | 304 |
| Cold rolled stainless steel coil | Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm, Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel coil | Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mm Surface: No.1/pickling |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
| 304 stainless steel pipe sizes and specifications | |
| Grade | 304 |
| Stainless steel seamless pipe | Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm, Length: 24000mm |
| Stainless steel welded pipe | Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm, Length: 18000mm |
| Stainless steel capillary pipe | Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm, Length: 18000mm |
| Stainless steel welded sanitary pipe | Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm |
| Stainless steel seamless sanitary pipe | Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm |
| Stainless steel square pipe | Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel rectangular pipe | Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel coil pipe | Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm |
| Standard | American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668 Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85· European Standard: EN10216-5, EN10216-2 Japanese Standard: JIS G3463-2006, JISG3459-2012 Russian Standard: GOST 9941-81 |
| 304 stainless steel profile sizes and specifications | |
| Grade | 304 |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO |
| Standard | ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 . |
| Stainless steel round Bar | Diameter: 2mm - 600mm |
| Stainless steel bright Bar | Diameter: 2mm - 600mm |
| Stainless steel hex Bar | Dimension: 6mm - 80mm |
| Stainless steel square bar | Dimension: 3.0 - 180mm |
| Stainless steel flat bar | Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm |
| Stainless steel angle bar | as requirements |
| Length | Normally 6m, or produce as requirements |
| Surface | Black, Bright. Peeled and Polished, Solution annealed. |
| Delivery condition | cold drawn, hot rolled, forged, grinding, centerless grinding |
| Tolerance | H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements |
